- Repair / Installation of garage door locks
- Fitting and installing new garage doors
- Garage door maintenance
- Squeaking Doors Repair
- Alignment of door tracks
- Bent Tracks Repair
- Maintenance Garage Doors
- Frequent lubrication of doors
- And Much More ….
You could do this garage door installation yourself or get it done through an expert like us. We start by measuring you residential garage door. Once you take all the measurements you can begin working on your project.
Steps 1 – measuring your residential garage door
Use drawings and measurements or even instructions on how to measure the garage door. Once we take our measurements we suggest you to purchase you the Clopay for your garage door that is meant for you.
Step 2 – After that we measure the width and the height of the door opening with some feet to inches, we can determine the garage door size that you might need. The rough openings must be similar to that of the door.
Step 3 – measure any labelled side rooms both right and left upto 3 and 4. There is a minimum of 3-3/4rth might be needed on each side of the installation of your vertical track for a better extension spring, standard torsion spring with EZ-SET torsion spring with the Torsion spring system and 5.5 for its EZ-SET extension-spring system.
Step 4 – you must begin with the labelled headroom. The ceiling measurements are also required for the standard extension EZ –SET extension spring. If you have restricted headroom, you will also find the hardware you need. You might also require an additional help room for an automatic-garage door. The garage door height extension, headroom measurement must be adjusted accordingly.
Ste p 5 – area of labelled backroom must be measured first. The door heights are required as well. There is an additional room at the back might be needed for an auto garage door opener installation.
We also do garage door repair Garden Grove besides garage door installation.